View UPC3245TB-E3_7787425.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r09ds0027ej0100 rev.1.00 page 1 of 22 sep 26, 2011 preliminary data sheet pc3245tb sige bicmos integrated circuit wideband amplifier ic with 3-st ep gain selection function description the pc3245tb is a wideband amplifier ic mainly designed for sw box and if amplifier in dbs lnb application. this ic has 3-step gain selection function. this ic is manufactured using our latest sige bicmos process that shows superior high frequency characteristics. features ? low voltage operation : v cc = 3.0 to 3.6 v (3.3 v typ.) ? power gain (high-gain mode) : g p = 20.5 db typ. @ f = 1.0 ghz : g p = 22 db typ. @ f = 2.2 ghz (middle-gain mode) : g p = 14.5 db typ. @ f = 1.0 ghz : g p = 15.5 db typ. @ f = 2.2 ghz (low-gain mode) : g p = 8.5 db typ. @ f = 1.0 ghz : g p = 9.5 db typ. @ f = 2.2 ghz ? high linearity (high-gain mode) : p o (1 db) = +10.5 dbm typ. @ f = 1.0 ghz : p o (1 db) = +8.5 dbm typ. @ f = 2.2 ghz (middle-gain mode) : p o (1 db) = +11 dbm typ. @ f = 1.0 ghz : p o (1 db) = +9.5 dbm typ. @ f = 2.2 ghz (low-gain mode) : p o (1 db) = +10.5 dbm typ. @ f = 1.0 ghz : p o (1 db) = +9.5 dbm typ. @ f = 2.2 ghz applications ? sw box, if amplifier in dbs lnb, other l-band amplifier etc . ordering information part number order number package marking supplying form pc3245tb-e3 pc3245tb-e3-a 6-pin super minimold (pb-free) c4e ? embossed tape 8 mm wide ? pin 1, 2, 3 face the perforation side of the tape ? qty 3 kpcs/reel remark to order evaluation samples, please contact your nearby sales office. part number for sample order: pc3245tb caution observe precautions when handling because these devi ces are sensitive to electrostatic discharge. r09ds0027ej0100 rev.1.00 sep 26, 2011
pc3245tb r09ds0027ej0100 rev.1.00 page 2 of 22 sep 26, 2011 pin connections, marking and internal block diagram pin no. pin name 1 input 2 gnd 3 gnd 4 output 5 v cc 6 gselect (top view) 3 2 1 4 5 6 c4e (bottom view) 4 5 6 3 2 1 (top view) 3 2 1 4 5 6 controller absolute maximum ratings parameter symbol conditions ratings unit supply voltage v cc t a = +25 c 4.0 v circuit current i cc t a = +25 c 60 ma gain selection voltage v gselect t a = +25 c 4.0 v power dissipation p d t a = +85 c note 166 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 55 to +150 c input power p in t a = +25 c +10 dbm note: mounted on double-sided copper-clad 50 50 1.6 mm epoxy glass pwb recommended operating range parameter symbol min. typ. max. unit supply voltage v cc 3.0 3.3 3.6 v gain selection voltage 1 (high-gain mode) v gselect 1 ? 0.2 0 0.2 v gain selection voltage 2 (low-gain mode) note v gselect 2 3.0 3.3 3.6 v operating frequency f 0.25 ? 3 ghz operating ambient temperature t a ? 40 +25 +85 c note: v cc ? 0.2 v v gselect 2 v cc + 0.2 v electrical characteristics 1 (high-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = gnd, z s = z l = 50 , unless otherwise specified) parameter symbol test conditi ons min. typ. max. unit circuit current i cc no input signal 22 27.5 33.5 ma power gain 1 g p 1 f = 1.0 ghz, p in = ? 30 dbm 18 20.5 23 db power gain 2 g p 2 f = 2.2 ghz, p in = ? 30 dbm 19 22 25 db gain 1 db compression output power 1 p o (1 db) 1 f = 1.0 ghz +7.5 +10.5 ? dbm gain 1 db compression output power 2 p o (1 db) 2 f = 2.2 ghz +5.5 +8.5 ? dbm input return loss 1 rl in 1 f = 1.0 ghz, p in = ? 30 dbm 7 10.5 ? db input return loss 2 rl in 2 f = 2.2 ghz, p in = ? 30 dbm 10 17 ? db output return loss 1 rl out 1 f = 1.0 ghz, p in = ? 30 dbm 10 32 ? db output return loss 2 rl out 2 f = 2.2 ghz, p in = ? 30 dbm 7 11.5 ? db
pc3245tb r09ds0027ej0100 rev.1.00 page 3 of 22 sep 26, 2011 electrical characteristics 2 (middle-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = open, z s = z l = 50 , unless otherwise specified) parameter symbol test conditi ons min. typ. max. unit circuit current i cc no input signal 22 27.5 33.5 ma power gain 1 g p 1 f = 1.0 ghz, p in = ? 30 dbm 12.5 14.5 16.5 db power gain 2 g p 2 f = 2.2 ghz, p in = ? 30 dbm 13 15.5 18 db gain 1 db compression output power 1 p o (1 db) 1 f = 1.0 ghz +8 +11 ? dbm gain 1 db compression output power 2 p o (1 db) 2 f = 2.2 ghz +6.5 +9.5 ? dbm input return loss 1 rl in 1 f = 1.0 ghz, p in = ? 30 dbm 10 16.5 ? db input return loss 2 rl in 2 f = 2.2 ghz, p in = ? 30 dbm 7 12 ? db output return loss 1 rl out 1 f = 1.0 ghz, p in = ? 30 dbm 10 18.5 ? db output return loss 2 rl out 2 f = 2.2 ghz, p in = ? 30 dbm 7 15.5 ? db electrical characteristics 3 (low-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = v cc , z s = z l = 50 , unless otherwise specified) parameter symbol test conditi ons min. typ. max. unit circuit current i cc no input signal 24 29 35 ma power gain 1 g p 1 f = 1.0 ghz, p in = ? 30 dbm 6.5 8.5 10.5 db power gain 2 g p 2 f = 2.2 ghz, p in = ? 30 dbm 7 9.5 12 db gain 1 db compression output power 1 p o (1 db) 1 f = 1.0 ghz +7.5 +10.5 ? dbm gain 1 db compression output power 2 p o (1 db) 2 f = 2.2 ghz +6.5 +9.5 ? dbm input return loss 1 rl in 1 f = 1.0 ghz, p in = ? 30 dbm 10 19 ? db input return loss 2 rl in 2 f = 2.2 ghz, p in = ? 30 dbm 7 15.5 ? db output return loss 1 rl out 1 f = 1.0 ghz, p in = ? 30 dbm 10 24 ? db output return loss 2 rl out 2 f = 2.2 ghz, p in = ? 30 dbm 10 18 ? db standard characteristics for reference 1 (high-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = gnd, z s = z l = 50 , unless otherwise specified ) parameter symbol test conditions reference value unit power gain 3 g p 3 f = 0.25 ghz, p in = ? 30 dbm 18 db power gain 4 g p 4 f = 2.6 ghz, p in = ? 30 dbm 20.5 db power gain 5 g p 5 f = 3.0 ghz, p in = ? 30 dbm 18 db gain flatness g p f = 1.0 ghz to 2.2 ghz, p in = ? 30 dbm 1.5 db isolation 1 isl1 f = 1.0 ghz, p in = ? 30 dbm 31 db isolation 2 isl2 f = 2.2 ghz, p in = ? 30 dbm 30 db noise figure 1 nf1 f = 1.0 ghz 4.0 db noise figure 2 nf2 f = 2.2 ghz 4.0 db output 3rd order intercept point 1 oip 3 1 f1 = 1 000 mhz, f2 = 1 001 mhz +22 dbm output 3rd order intercept point 2 oip 3 2 f1 = 2 200 mhz, f2 = 2 201 mhz +20 dbm 2nd order intermodulation distortion im 2 f1 = 1 000 mhz, f2 = 1 001 mhz, p out = ? 5 dbm/tone 42 dbc 2nd harmonic 2f 0 f0 = 1.0 ghz, p out = ? 15 dbm 53 dbc
pc3245tb r09ds0027ej0100 rev.1.00 page 4 of 22 sep 26, 2011 standard characteristics for reference 2 (middle-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = open, z s = z l = 50 , unless otherwise specified ) parameter symbol test conditions reference value unit power gain 3 g p 3 f = 0.25 ghz, p in = ? 30 dbm 14.5 db power gain 4 g p 4 f = 2.6 ghz, p in = ? 30 dbm 15.5 db power gain 5 g p 5 f = 3.0 ghz, p in = ? 30 dbm 14.5 db gain flatness g p f = 1.0 ghz to 2.2 ghz, p in = ? 30 dbm 1.0 db isolation 1 isl1 f = 1.0 ghz, p in = ? 30 dbm 24.5 db isolation 2 isl2 f = 2.2 ghz, p in = ? 30 dbm 24.5 db noise figure 1 nf1 f = 1.0 ghz 6.0 db noise figure 2 nf2 f = 2.2 ghz 6.5 db output 3rd order intercept point 1 oip 3 1 f1 = 1 000 mhz, f2 = 1 001 mhz +24 dbm output 3rd order intercept point 2 oip 3 2 f1 = 2 200 mhz, f2 = 2 201 mhz +21 dbm 2nd order intermodulation distortion im 2 f1 = 1 000 mhz, f2 = 1 001 mhz, p out = ? 5 dbm/tone 49 dbc 2nd harmonic 2f 0 f0 = 1.0 ghz, p out = ? 15 dbm 62 dbc standard characteristics for reference 3 (low-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = v cc , z s = z l = 50 , unless otherwise specified ) parameter symbol test conditions reference value unit power gain 3 g p 3 f = 0.25 ghz, p in = ? 30 dbm 8 db power gain 4 g p 4 f = 2.6 ghz, p in = ? 30 dbm 10 db power gain 5 g p 5 f = 3.0 ghz, p in = ? 30 dbm 10 db gain flatness g p f = 1.0 ghz to 2.2 ghz, p in = ? 30 dbm 1.0 db isolation 1 isl1 f = 1.0 ghz, p in = ? 30 dbm 21 db isolation 2 isl2 f = 2.2 ghz, p in = ? 30 dbm 24 db noise figure 1 nf1 f = 1.0 ghz 9.0 db noise figure 2 nf2 f = 2.2 ghz 9.0 db output 3rd order intercept point 1 oip 3 1 f1 = 1 000 mhz, f2 = 1 001 mhz +23 dbm output 3rd order intercept point 2 oip 3 2 f1 = 2 200 mhz, f2 = 2 201 mhz +21 dbm 2nd order intermodulation distortion im 2 f1 = 1 000 mhz, f2 = 1 001 mhz, p out = ? 5 dbm/tone 50 dbc 2nd harmonic 2f 0 f0 = 1.0 ghz, p out = ? 15 dbm 64 dbc
pc3245tb r09ds0027ej0100 rev.1.00 page 5 of 22 sep 26, 2011 test circuit c1 in 1 5 4 2, 3 out gnd c4 c5 c2 v cc c3 z s = z l = 50 pattern l1 g select c6 6 note note: the power supply to 4 pin and 5 pin is separated and supplied by the pattern. the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. gselect pin connection gselect mode gnd high-gain mode open middle-gain mode v cc low-gain mode components list symbol type value unit l1 chip inductor 47 nh c1, c2 chip capacitor 100 pf c3 chip capacitor 1 000 pf c4 feed-through capacitor 1 000 pf c5, c6 chip capacitor 1 000 pf
pc3245tb r09ds0027ej0100 rev.1.00 page 6 of 22 sep 26, 2011 typical characteristics 1 (high-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = gnd, z s = z l = 50 , unless otherwise specified ) 40 30 20 10 0 0 1.0 2.0 3.0 4.0 ? 50 0 5 0 100 circuit current vs. supply voltage circuit current i cc (ma) supply voltage v cc (v) circuit current vs. operating ambient temperature circuit current i cc (ma) operating ambient temperature t a ( c) frequency f (ghz) power gain vs. frequency power gain g p (db) frequency f (ghz) ? 40 c frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 26 24 22 20 18 16 14 12 0 1.0 2.0 3.0 4.0 5.0 +25 c 3.3 v 3.0 v rf = off 3.0 v 0 ? 10 ? 20 ? 30 t a = + 85 c 40 30 20 10 0 rf = off v cc = 3.6 v 26 24 22 20 18 16 14 12 0 1.0 2.0 3.0 4.0 5.0 power gain g p (db) power gain vs. frequency input return loss vs. frequency input return loss rl in (db) 3.3 v frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 0 ? 10 ? 20 ? 30 input return loss vs. frequency input return loss rl in (db) t a = + 85 c +25 c ? 40 c v cc = 3.0 v 3.6 v 3.3 v v cc = 3.6 v t a = ? 40 c +25 c + 85 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 7 of 22 sep 26, 2011 output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 v cc = 3.0 v, 3.3 v, 3.6 v isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 t a = ? 40 c +25 c, + 85 c k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 v cc = 3.0 v, 3.3 v, 3.6 v k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 t a = + 85 c +25 c ? 40 c v cc = 3.3 v, 3.6 v 3.0 v + 85 c +25 c t a = ? 40 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 8 of 22 sep 26, 2011 frequency f (ghz) noise figure vs. frequency noise figure nf (db) 8 7 6 5 4 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3.0 v, 3.3 v v cc = 3.6 v frequency f (ghz) noise figure vs. frequency noise figure nf (db) 8 7 6 5 4 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 ? 40 c +25 c t a = +85 c f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) ? 40 c +25 c t a = +85 c f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) ? 40 c +25 c t a = +85 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 9 of 22 sep 26, 2011 p out f1 = 1 000 mhz f2 = 1 001 mhz 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 ? 40 ? 30 ? 20 ? 10 0 output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) im 3 p out f1 = 2 200 mhz f2 = 2 201 mhz 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 ? 40 ? 30 ? 20 ? 10 0 output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) p out f1 = 1 000 mhz f2 = 1 001 mhz 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 ? 40 ? 30 ? 20 ? 10 0 output power, im 2 vs. input power output power p out (dbm) 2nd order intermodulation distortion im 2 (dbm) input power p in (dbm) im 2 output power, 2f 0 vs. input power output power p out (dbm) 2nd harmonics 2f 0 (dbm) input power p in (dbm) 2f 0 p out 20 ? 100 ? 80 ? 60 ? 40 ? 20 0 f0 = 1 000 mhz 10 ? 40 ? 30 ? 20 ? 10 0 oip 3 = +22 dbm oip 3 = +20 dbm im 3 remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 10 of 22 sep 26, 2011 s-parameters 1 (high-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = gnd, m onitored at connector on board) s 11 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 38.10 ? 24.75 2 : 2 200 mhz 38.35 1.05 1 2 s 22 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 52.22 ? 0.80 2 : 2 200 mhz 79.35 ? 14.30 1 2 remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 11 of 22 sep 26, 2011 typical characteristics 2 (middle-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = open, z s = z l = 50 , unless otherwise specified ) 40 30 20 10 0 0 1.0 2.0 3.0 4.0 ? 50 0 5 0 100 circuit current vs. supply voltage circuit current i cc (ma) supply voltage v cc (v) circuit current vs. operating ambient temperature circuit current i cc (ma) operating ambient temperature t a ( c) frequency f (ghz) power gain vs. frequency power gain g p (db) frequency f (ghz) ? 40 c frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 22 20 18 16 14 12 10 8 0 1.0 2.0 3.0 4.0 5.0 v cc = 3.6 v +25 c 3.3 v 3.0 v rf = off 3.0 v 3.3 v 0 ? 10 ? 20 ? 30 t a = + 85 c 40 30 20 10 0 rf = off v cc = 3.6 v 22 20 18 16 14 12 10 8 0 1.0 2.0 3.0 4.0 5.0 power gain g p (db) power gain vs. frequency +25 c input return loss vs. frequency input return loss rl in (db) 3.3 v frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 0 ? 10 ? 20 ? 30 input return loss vs. frequency input return loss rl in (db) t a = ? 40 c + 85 c +25 c t a = ? 40 c + 85 c v cc = 3.6 v 3.0 v remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 12 of 22 sep 26, 2011 output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 30 ? 20 ? 10 isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 ? 40 c 3.3 v output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 30 ? 20 ? 10 v cc = 3.6 v 3.0 v t a = ? 40 c +25 c + 85 c + 85 c v cc = 3.0 v, 3.3 v, 3.6 v +25 c v cc = 3.0 v, 3.3 v, 3.6 v t a = ? 40 c, +25 c t a = + 85 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 13 of 22 sep 26, 2011 frequency f (ghz) noise figure vs. frequency noise figure nf (db) 10 9 8 7 6 5 4 3 2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3.0 v v cc = 3.6 v frequency f (ghz) noise figure vs. frequency noise figure nf (db) 10 9 8 7 6 5 4 3 2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 ? 40 c +25 c t a = +85 c f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) +25 c, ? 40 c t a = +85 c f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) ? 40 c t a = +25 c, +85 c 3.3 v remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 14 of 22 sep 26, 2011 p out f1 = 1 000 mhz f2 = 1 001 mhz 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 20 ? 40 ? 30 ? 20 ? 10 0 output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) p out f1 = 1 000 mhz f2 = 1 001 mhz 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 ? 40 ? 30 ? 20 ? 10 0 output power, im 2 vs. input power output power p out (dbm) 2nd order intermodulation distortion im 2 (dbm) input power p in (dbm) im 2 output power, 2f 0 vs. input power output power p out (dbm) 2nd harmonics 2f 0 (dbm) input power p in (dbm) 2f 0 p out 20 ? 100 ? 80 ? 60 ? 40 ? 20 0 f0 = 1 000 mhz 10 ? 40 ? 30 ? 20 ? 10 0 10 p out f1 = 2 200 mhz f2 = 2 201 mhz 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 20 ? 40 ? 30 ? 20 ? 10 0 10 oip 3 = +21 dbm im 3 im 3 oip 3 = +24 dbm remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 15 of 22 sep 26, 2011 s-parameters 2 (middle-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = open, monitored at connector on board) s 11 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 54.35 15.40 2 : 2 200 mhz 54.10 ? 26.80 1 2 s 22 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 45.95 ? 10.80 2 : 2 200 mhz 66.50 9.75 1 2 remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 16 of 22 sep 26, 2011 typical characteristics 3 (low-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = v cc , z s = z l = 50 , unless otherwise specified ) 40 30 20 10 0 0 1.0 2.0 3.0 4.0 ? 50 0 5 0 100 circuit current vs. supply voltage circuit current i cc (ma) supply voltage v cc (v) circuit current vs. operating ambient temperature circuit current i cc (ma) operating ambient temperature t a ( c) frequency f (ghz) power gain vs. frequency power gain g p (db) frequency f (ghz) ? 40 c frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 14 12 10 8 6 4 2 0 0 1.0 2.0 3.0 4.0 5.0 +25 c 3.3 v 3.0 v rf = off 0 ? 10 ? 20 ? 30 t a = + 85 c 40 30 20 10 0 rf = off v cc = 3.6 v 14 12 10 8 6 4 2 0 0 1.0 2.0 3.0 4.0 5.0 power gain g p (db) power gain vs. frequency input return loss vs. frequency input return loss rl in (db) frequency f (ghz) 0 1.0 2.0 3.0 4.0 5.0 0 ? 10 ? 20 ? 30 input return loss vs. frequency input return loss rl in (db) v cc = 3.0 v, 3.3 v, 3.6 v t a = ? 40 c, +25 c, + 85 c v cc = 3.0 v 3.3 v 3.6 v t a = + 85 c ? 40 c +25 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 17 of 22 sep 26, 2011 output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 30 ? 20 ? 10 v cc = 3.3 v, 3.6 v 3.0 v output return loss vs. frequency frequency f (ghz) output return loss rl out (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 30 ? 20 ? 10 t a = ? 40 c + 85 c +25 c isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 isolation vs. frequency frequency f (ghz) isolation isl (db) 0 1.0 2.0 3.0 4.0 5.0 0 ? 50 ? 40 ? 30 ? 20 ? 10 + 85 c k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 k factor vs. frequency frequency f (ghz) k factor k 0 1.0 2.0 3.0 4.0 5.0 10 0 2 4 6 8 t a = + 85 c +25 c ? 40 c t a = ? 40 c, +25 c v cc = 3.0 v, 3.3 v, 3.6 v v cc = 3.0 v, 3.3 v, 3.6 v remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 18 of 22 sep 26, 2011 frequency f (ghz) noise figure vs. frequency noise figure nf (db) 12 11 10 9 8 7 6 5 4 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3.3 v v cc = 3.6 v frequency f (ghz) noise figure vs. frequency noise figure nf (db) 12 11 10 9 8 7 6 5 4 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 ? 40 c +25 c t a = +85 c f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 1.0 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) ? 40 c +25 c t a = +85 c f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) v cc = 3.6 v 3.0 v 3.3 v f = 2.2 ghz 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 30 ? 20 ? 10 0 1 0 output power vs. input power output power p out (dbm) input power p in (dbm) +25 c t a = +85 c 3.0 v ? 40 c remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 19 of 22 sep 26, 2011 p out f1 = 1 000 mhz f2 = 1 001 mhz 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 20 ? 40 ? 30 ? 20 ? 10 0 output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) im 3 f1 = 2 200 mhz f2 = 2 201 mhz p out f1 = 1 000 mhz f2 = 1 001 mhz 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 ? 40 ? 30 ? 20 ? 10 0 output power, im 2 vs. input power output power p out (dbm) 2nd order intermodulation distortion im 2 (dbm) input power p in (dbm) im 2 output power, 2f 0 vs. input power output power p out (dbm) 2nd harmonics 2f 0 (dbm) input power p in (dbm) 2f 0 p out 20 ? 100 ? 80 ? 60 ? 40 ? 20 0 f0 = 1 000 mhz 10 ? 40 ? 30 ? 20 ? 10 0 10 p out 40 20 0 ? 20 ? 40 ? 60 ? 80 ? 100 20 ? 40 ? 30 ? 20 ? 10 0 output power, im 3 vs. input power output power p out (dbm) 3rd order intermodulation distortion im 3 (dbm) input power p in (dbm) im 3 10 oip 3 = +21 dbm oip 3 = +23 dbm remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 20 of 22 sep 26, 2011 s-parameters 3 (low-gain mode) (t a = +25 c, v cc = 3.3 v, gselect = v cc , monitored at connector on board) s 11 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 53.90 ? 10.05 2 : 2 200 mhz 39.15 ? 7.65 2 1 s 22 - frequency start : 100 mhz stop : 5 000 mhz 1 : 1 000 mhz 48.90 ? 6.80 2 : 2 200 mhz 61.30 6.15 1 2 remark the graphs indicate nominal characteristics.
pc3245tb r09ds0027ej0100 rev.1.00 page 21 of 22 sep 26, 2011 package dimensions 6-pin super minimold (unit: mm) 0.90.1 0.7 0 to 0.1 0.15 +0.1 ?0.05 0.2 +0.1 ?0.05 2.0 +0.15 ?0.20 1.3 0.65 0.65 1.250.1 2.10.1 0.1 min.
pc3245tb r09ds0027ej0100 rev.1.00 page 22 of 22 sep 26, 2011 notes on correct use (1) observe precautions fo r handling because of elect ro-static sensitive devices. (2) form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation). all the ground terminals must be connected together with wide ground pattern to decrease impedance difference. (3) the bypass capacitor should be attached to the v cc line. (4) the inductor (l) must be attached between v cc and output pins. the inductance value should be determined in accordance with desired frequency. (5) the dc cut capacitor must be attached to input and output pin. recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of flow processes : 1 time maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below ws260 partial heating peak temperature (package surface temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below hs350 caution do not use different soldering methods together (except for partial heating).
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history pc3245tb data sheet description rev. date page summary 1.00 sep 26, 2011 ? first edition issued
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is s ubject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control l aws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology described in this document for any purpose rela ting to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporate d into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 7. renesas electronics products are classified according to the following three quality grades: "standard", "high quality", an d "specific". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. you must check the quality grade of each renesas electronics produ ct before using it in a particular application. you may not use any renesas electronics product for any application categorized as "specific" without the prior written consent of renesas electronics. fu rther, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for an application categorized as "specific" or for which the product is not intended wh ere you have failed to obtain the prior written consent of renesas electronics. the quality grade of each renesas electronics product is "standard" unless otherwise expressly specified in a renesas electroni cs data sheets or data books, etc. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment ; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "specific": aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or syst ems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct thr eat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas el ectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design . please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compati bility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 1 harbourfront avenue, #06-10, keppel bay tower, singapore 098632 tel: +65-6213-0200, fax: +65-6278-8001 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 11f., samik lavied' or bldg., 720-2 yeoksam-dong, kangnam-ku, seoul 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2011 renesas electronics corporation. all rights reserved. colophon 1.1

▲Up To Search▲

Price & Availability of UPC3245TB-E3

	To Download UPC3245TB-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .